Size: 31 1/4" x 19 5/8" Depth: 8 1/4" & 10 5/8"
Pemberton sinks are offered in a range of popular integral, under mount models to suit and application or requirement. Pemberton sinks can be install seamlessly with granite, engineered stone, and laminate countertops to creat an elegant look that is also functional.
GENERAL USE We recommend cleaning Pemberton sinks with a powder detergent like Ajax or Comet. The special satin gloss finish is improved with powder detergents but all liquid detergents will also prove satisfactory. Please be careful when using drain cleaners. Some drain cleaners react relatively violently as one would expect by the very nature of the product and instructions for handling are always precisely given with the product. Ensure that the cleaning agent goes down the waste outlet and that it does not sit in the basin.
Pemberton is heat resistant and will not mark below temperatures of 365�F. This means, in practical terms, that pots in which water for vegetables for example are boiled could be left on your sink indefinitely. However it is always good practice to allow hot items to cool before placing them in any sink. Alternatively run some water when putting a hot pot into the basin. By doing this there is no chance of marking your sink, as the hot item is instantly cooled.
HOW TO REMOVE SCRATCHES Scratches and small chips can be removed by sanding with a Scotch-Brite® pad for fine scratches and sandpaper for deeper scratches and chips. Use a coarse sandpaper to start, finishing off with fine sandpaper and a Scotch-Brite© pad. A repair kit is available from the manufacturer if needed for chips that are too deep to be sanded.
- Thermoformed
-From the highest quality 100% Acrylic sheets, offering up to 10x higher density than cast sinks and with over 3 times the resistance to thermo-shock cracking.
- Satin Finish
-A beautiful finish that resists showing everday usage, but can always be buffed with a mild abrasive cleaner and a scotch-brite pad to make like new again
- 3/4 Thick Mounting Lip
-Makes undermounting on laminate simple and strong with an upscale look.
- 100% Acrylic
- Withstands temperatures up to 360oF
 | 
Copper
